Connect Android Device to Eduroam

About

Connect Android devices to the eduroam network.

NOTE: If you are unable to connect to the network and it has been more than a semester since you changed your password, your password may have expired. Please follow the LUNA Password Reset Instructions article for steps on resetting your password.

Environment

Android devices

These steps were created and tested on devices running Android version 16. (NOTE: Steps may vary depending on your Android version, but they should generally be similar)

Steps

1. Go to Settings
   
    
2. In the Settings menu, click Wireless & networks or Connections.  
   
    
3. Make sure that Wi‐Fi slider is turned. Once finished, click Wi-Fi
   
    
4. Click eduroam under the available networks section. (If you do not see eduroam listed, you may be in an area on campus where there is no Wifi service available).
   
    
5. Enter in you La Salle email under identity and La Salle Password
   
    
6. Press Use system certificates for CA certificate
   
    
7. Once selected, enter in Domain as lasalle.edu
   
    
8. Once entered, press view more or scroll down (NOTE: Steps may vary depending on Android version)
   
   ​​​​​
9. For "EAP method" select PEAP. Then for "Phase 2 authentication" select MSCHAPV2
   
    
10. Then click Connect.
    
     
11. You will be redirected to the Wi‐Fi settings menu and you will be connected to the network.

*If you are having trouble with these steps after following the directions, please stop by Hayman 200 for us to assist you.*